The release updates the ActiveX plug-in for Windows

Oct 14, 2014 08:47 GMT  ·  By

TRENDnet has rolled out a new firmware package compatible with TV-IP743SIC v1.0R baby cameras, namely version 1.0.1, which updates the ActiveX plug-in for Windows, improve WPS compatibility, and resolves incorrect system time after reboot.

In order to benefit from these changes, first check the currently installed software, and make sure it isn’t either newer or matching this release.

To do so, simply log into the camera using Bonjour, UPnP or IP address, go to Setup > Tools > Firmware Upgrade > Firmware Information, and the current build should be displayed on-screen.

If all is ok, then save and unzip the downloadable archive, from the “Firmware Information” screen click on the “Browse...” button, navigate and select the newly extracted “update_TV-IP743SIC_1.0.1_4219.bin” file, and click “Upload.”

During the installation process, make sure you don’t power off/restart the wireless camera, as this event will not only crash the upgrade but might also cause serious device malfunctions or even render the device unusable.

In addition to that, TRENDnet recommends that, upon completion, you go to Setup > Tools > System, and reset the camera configuration to factory defaults. Setting up a fresh configuration is more desirable, as not all backup files can be restored over each firmware version.

With this in mind, download TRENDnet TV-IP743SIC Camera Firmware 1.0.1, take into account all aforementioned aspects, and upgrade your device’s software to the latest version.

TRENDnet TV-IP743SIC v1.0R Baby Cam (3 Images)

TRENDnet TV-IP743SIC Baby Cam Wall Mount
TRENDnet TV-IP743SIC Baby CamTRENDnet TV-IP743SIC Box
Open gallery