Micron has added another firmware for its C400 SSD Series with 6 Gb/s data rate speed. It increases performance on all of Microsoft's operating systems but especially the latest, while also improving robustness in the event of a power loss and significantly reducing reboot time.
The firmware corrects a minor status reporting an error during the self-test execution of SMART drive, which did not affect the SMART attribute data.
The release is compatible with the 4 C400 mSATA SSD products with capacities of 32GB, 64GB, 128GB and 256GB, and with the 12 C400 1.8 inch/2.5 inch SSD products (9 of them are in production) with capacities of 128GB, 256GB and 512GB and voltages of 3.3V and 5V.
Bear in mind that, if you want to update you SSD firmware, Micron strongly recommends that you back up any important files before performing the process.
Afterwards, you will have to disable any drive password in BIOS because most security protocols do not allow firmware updates.
This said, if you decide to update your firmware, you can choose the appropriate SSD at the link below.Micron C400 and C400 mSATA SSD Firmware