How to: iOS 6.x Untethered Jailbreak on Linux

Jailbreak your iPhone, iPad or iPod on Linux using evasi0n

  iOS 6 untethered jailbreak is here!
The following tutorial will teach Linux users how to jailbreak their Apple iPhone 3GS, iPhone 4/4S, iPad 2/3/4 and iPod Touch 4G/5G devices that run iOS 6 or later.

The following tutorial will teach Linux users how to jailbreak their Apple iPhone 3GS, iPhone 4/4S, iPad 2/3/4 and iPod Touch 4G/5G devices that run iOS 6 or later.

In this tutorial we will use the recently released evasi0n jailbreak tool, which runs on Linux, Mac OS X and Windows platforms. In no more than five minutes, your iDevice will be jailbreaked, only if you read the following information and warnings carefully.

Supported devices:

· iPhone 3GS;
· iPhone 4 GSM;
· iPhone 4S;
· iPod Touch 4G;
· iPod Touch 5G;
· iPad 2 Wi-Fi;
· iPad 2 3G;
· iPad 2 2012;
· iPad 3 Wi-Fi
· iPad 3 Wi-Fi + 4G;
· iPad 4 Wi-Fi;
· iPad 4 Wi-Fi + 4G;
· iPad Mini Wi-Fi;
· iPad Mini 3G.

Requirements:

· evasi0n 1.0;
· A device from the above list with iOS 6.0, 6.0.1 or 6.1;
· A Linux distribution with a recent version of libimobiledevice library, kernel >= 2.6.24, and libgtk+-2.0 >= 2.24.13.

WARNING: Make sure that your iPad, iPhone or iPod device is supported (see the supported devices list at the beginning of the article) and that is was already updated to iOS 6.x. Those of you who require a network unlock DO NOT PROCEED with the tutorial!

ATTENTION: ALWAYS make a backup of your device(s) before the jailbreak procedure! Make sure the battery is charged over 50% and that the device is connected to the computer via the USB cable!

Not meeting these requirements will result in a failure!


Step 1 – Download and execute evasi0n

You can grab a copy of the evasi0n jailbreak tool right now from here. Download it on your desktop and extract the file from the archive. Both 32-bit and 64-bit architectures are supported.

Connect your iDevice and double-click the executable for your architecture and you will see the following window...

Review image


Step 2 – Jailbreak your iDevice

Your device will be detected, and all you have to do now is to click the "Jailbreak" button. DO NOT PUSH ANY BUTTONS! DO NOT TOUCH THE COMPUTER! DO NOT REMOVE ANY CABLE!

When the progress bar on the evasi0n tool is complete, and the evasi0n icon appears on your device, launch it to complete the jailbreak process!

When evasi0n finished the jailbreak process, reboot the device and you'll see the Cydia icon on the home screen of your iDevice, which means that the jailbreak process is over and you can restore the backup. Watch the video below for more details!



If you encounter any issues with the tutorial, do not hesitate to use our commenting system below.

Comments